First Use - Philips Jordan Sensiflex Manual Del Usuario

ENGLISH
4
C
C
1
2
C
C

First use

1 Put the plug in the wall socket.
2 Place the toothbrush in the charging unit.
The brush will now be charged automatically.
Charge the applance for 6 hours (NiMH version) or
3 hours (NiCD version) before you use the
appliance for the first time.
(Check the symbol on your appliance to determine
which type you have).
3 Mount the brush head on the toothbrush by
inserting it into the bayonet catch and
turning it.
Put some toothpaste on the brush.
4 Place the brush against your teeth and press
the on/off button.
5 Brush one tooth at a time, until you have
cleaned all teeth completely (minimum 2
minutes, see also the brushing instructions).
As a result of the Controlled Pressure system, you
will hear and feel the brush flexing backwards
when too much pressure is applied.
6 After use, always clean the inside and the
outside of the brush head as well as the
toothbrush itself.
You can put the toothbrush back in the charging
unit after use.
For more information on how to use the appliance,
read the section 'instructions for use'.