Setting Up Your Computer; Changing Between Tower And Desktop Orientations - Dell Precision T7400 Guía De Referencia Rápida

What Are You Looking For?
• How to use Linux
• E-mail discussions with users of Dell
Precision products and the Linux
operating system
• Additional information regarding Linux
and my Dell Precision computer

Setting Up Your Computer

Changing Between Tower and Desktop Orientations

CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the
NOTE:
To change your computer to either the tower or the desktop orientation, you
must use an optional kit available from Dell. See "Product Information" in your
User's Guide for more details on ordering from Dell.
NOTE:
The tower computer supports one more 3.5-inch drive in the front than does
the desktop computer.
1 Follow the procedures in "Before You Begin" in your User's Guide.
2 Remove the computer cover (see "Removing the Computer Cover" in your
User's Guide).
3 Remove the front panel (see "Removing the Front Panel" in your User's Guide).
4 Remove the drive panel and prepare the drive panel by adding or removing
inserts, as needed (see "Drive Panels" in your User's Guide).
Switching From Tower to Desktop Orientation
1 Remove all installed floppy drives or media card readers by following the steps
in "Removing a Floppy Drive or Media Card Reader (Tower Computer)" in
your User's Guide, and then reinstall a single floppy drive or media card reader
by following the steps in "Installing a Floppy Drive or Media Card Reader
(Desktop Computer)" in your User's Guide.
2 Remove all installed optical drives by following the steps in "Removing an
Optical Drive (Tower Computer)" in your User's Guide, and then reinstall
the drives by following the steps in "Installing an Optical Drive (Desktop
Computer)" in your User's Guide.
Find It Here
Dell Supported Linux Sites
• linux.dell.com
• lists.us.dell.com/mailman/listinfo/linux-
precision
Product Information Guide
.
Quick Reference Guide
9