Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
— VIDEO/AUX
— MD
—LINE OUT
—SURROUND
SPEAKERS
- CD DIGITAL OUT
(OPTICAL)
Refer to the operating
instructions
of the connected
equipment
for details.
The connecting
cords are not supplied.
Obtain the necessary
connecting
cords.
Consult
your local Aiwa dealer for optional
equipment.
.!,,=w=A\'I'lla,$,m''a~
!''s*!!!w,wJm#*
#*.s*4M4M we'w~lw!wll,$e,x
*.H *,',mw*d,,$* l!=*el')-3r&,,i,:=J[,~l'$'*
* .-4
VIDEO/AUX JACKS
This unit can input analog sound signals through
these jacks.
Use a cable with RCA phono plugs to connect
audio equipment
(turntables,
LD players,
MD players, VCRs, TV, etc.).
Connect
the red plug to the
VIDEO/AUX R
jack, and the white
plug to the VIDEO/AUX
L jack.
When connecting
a turntable
Use an Aiwa turntable
equipped
with a built-in equalizer
amplifier.
ml , ,-? * ,*,*R
&=:SSS&#!M~#,a.
,~m,!,'ql' &,.?q, @17*! ,M ,.*,,w8,&m '.,*. ! .W.*. *E,,,w" '- --=
Jllwa.! r.,=.
.- ,,=n. q*.-
MD JACKS
This jack is recommended
to connect
with an MD player.
Use a cable with RCA phono plugs.
Connect
the red plug to the MD R jack, and the white plug to the
MD L jack.
WI,'*, a,., b ,, Im,-&m m,.sdlmltbs$m(a
ES,lm=+wma'm & %!=1' Qdlwzl!lna{'s':$
e.-=,,.
. "-, .,,,,*=,m#alwlB,a*%
LINE OUT JACKS
This unit can output analog sound signal through
these jacks.
Use a cable with RCA phono plugs to connect
audio equipment
with LINE IN (analog
input) jacks.
Connect
the red plug of a cable to LINE OUT R jack, and the
white plug to LINE OUT L jack.
m
Do not connect
an equipment
to LINE
OUT
jacks and VIDEO/
AUX
jacks simultaneously.
Otherwise,
noise is generated
and
malfunction
occurs.
.—-= -A'~-A'"=w3!!mlmm'**w
'mm-a!nm='!- 'm~%'~'m~~a'-%a!m?!-
'm~~'%%?!-,t,
=!*L"J* .=@--- w
CD DIGITAL OUT (OPTICAL) JACK
This unit can output CD digital sound signals
through
this jack.
Use an optical
cable to connect
digital
audio equipment
(DAT
deck, MD recorder,
etc.).
Remove the dust cap @ from the CD DIGITAL
OUT (OPTICAL)
jack. Then,
connect
an optical
cable plug to the CD DIGITAL
OUT (OPTICAL)
jack.
Connect
optional surround
speakers
with the 8 ohms to, 16 ohms
impedance
to the jacks.
[~
s
1-
-!
B
POWER
(
I
VIDEO/AUX
I
To play equipment
connected
to VIDEO/AUX
jacks or MD jacks
proceed
as follows.
1 Press VIDEO/AUX or MD.
To plav the equipment
connected
to VI DEO/AUX,
press
VIDEO/AUX.
"VIDEO"
appears
on the display,
To plav the eaui~ment
connected
to MD, press
MD. "MD"
appears
on the display.
2 Play the connected equipment.
To change a source name in the display
When VIDEO/AUX
is pressed,
"VIDEO
is displayed
initially.
It
can be changed
to "AUX
or "TV.
With the power on, press
POWER
while pressing
VIDEO/AUX.
Repeat the procedure
to select one of the names.
To
adjust the sound level of the external source
When the sound level of the external
source
is much higher or
much lower than that of other function sources, adjust it as follows.
1
Press
VIDEO/AUX
or MD and play the equipment,
2
Press +
or >
so that the sound level becomes
the same
as that of other function
sources.
m
During recording,
the sound level can not be adjusted
.
When the CD DIGITAL
OUT (OPTICAL)
jack is not being
used
Attach the supplied
dust cap.
28
ENGLISH
Publicidad
Tabla de contenido
