Settings; General Settings - Tascam BD-MP4K Manual Del Usuario

Settings

On the Settings screens, which include the General Settings, Display Settings, Audio Settings and System Information screens, settings
can be made and information checked, for example.
While the Settings icon is selected, press the ENTER button to show icons for the various settings.
To move between menus, confirm settings and execute items, use the shift* functions of buttons on the unit or use the cursor and
ENTER buttons on the remote control. (These explanations will primarily use remote control operations.)
* To move the cursor, confirm settings and execute items using the unit, press the HIDE/MENU [SHIFT] button and the button with the
desired shift function (shown below the button with light characters on a dark background) at the same time.
NOTE
Settings cannot be opened when the HIDE MENU function is enabled.
Settings screens can be opened by pressing the SETUP button on the remote control. Some items, however, cannot be changed
when, for example, playing, paused or stopped.
Basic remote control functions
p To exit a folder or submenu, press the l cursor button repeatedly to return to the first screen.
p Press the HOME button to return to the Home Screen.
p Press the RETURN button even during operation to return to the previous screen.
p In the lists of settings below, underlined Option items are default values.

General Settings

System
Function
Screen Saver
HDMI CEC
Disk Auto Upgrade
Load Default
Upgrade
Easy Setup
Copyrights
18
TASCAM BD-MP4K
Options
On/Off
HDMI1 ON/HDMI2 ON/CEC OFF
On/Off
More...
p Disc
p Storage
More...
More...
Explanation
Turn the screen saver on/off.
If "On" is selected, the following functions become enabled when
nothing is playing back or when playback is stopped or paused.
p A screensaver will appear after about 3 minutes without
operation.
p The unit will automatically turn off after about 10 minutes
without operation.
When an HDMI cable is used to connect a device such as this unit
that supports HDMI CEC to a TV that supports HDMI CEC, this
function allows the remote control to link operation of both of
them.
(When off, only the unit will respond to the remote control.)
If an upgrade disc is loaded into this unit, upgrading will occur
automatically.
This function restores the various settings stored in the backup
memory of the unit to their factory default values.
Use to upgrade the unit firmware.
(The medium used for the upgrade can be selected.)
ATTENTION
When using a USB flash drive or an SD card to upgrade the unit, do
not connect any other type of media to other connectors.
The following settings can be made easily using a setup wizard:
p language, monitor resolution and monitor aspect ratio
Use the General Settings items to make additional settings.
This shows the GNU General Public License.