Display Settings - Tascam BD-MP4K Manual Del Usuario

Display Settings

TV
Function
TV Screen
Resolution
HDR Setting
Dolby Vision mode
TV System
HDMI Color Space
HDMI Deep Color
HDMI 1080P 24Hz
HDMI 3D
For this function to work properly, the TV or monitor must support HDR.
1
*
For this function to work properly, the TV or monitor must support Dolby Vision.
2
*
When in a region that supports both NTSC and PAL, select "Multi".
3
*
For this function to work properly, the TV or monitor must support HDMI version 1.3 or later.
4
*
22
TASCAM BD-MP4K
Options
p 16:9 Full
p 16:9 Normal
p 4:3 Pan & Scan
p 4:3 Letterbox
p Auto
p 480I/576I
p 480P/576P
p 720P
p 1080I
p 1080P
p 2160P
Auto/HDR/SDR
Auto/Low latency/LL RGB/Off
NTSC/PAL/Multi
p RGB
p YCbCr
p YCbCr422
p Full RGB
30-bit/36-bit/48-bit
Off
On/Off
Auto/Off
Explanation
Use to set the display aspect ratio.
p 16:9 Full: This sets the aspect ratio to 16:9. 4:3 video will also be
converted to 16:9.
p 16:9 Normal: This usually sets the aspect ratio to 16:9. 4:3 video
will be shown with black bands on the left and
right sides.
p 4:3 Pan & Scan: This sets the aspect ratio to 4:3. 16:9 video will
also be converted to 4:3.
p 4:3 Letterbox: This usually sets the aspect ratio to 4:3. 16:9 video
will be shown with black bands on the top and
bottom.
Use to set the image resolution.
p If Auto is selected, this unit will detect the optimal resolution for
the monitor or TV. In this case, a message confirming whether to
save the selected setting will appear. Select OK as necessary.
Set whether signals output are high dynamic range (HDR) or
standard dynamic range (SDR).
p Auto: The unit switches automatically between HDR and SDR
resolutions.
p HDR: HDR resolution is always output.
p SDR: SDR resolution is always output.
NOTE
This function cannot be used when the Dolby Vision mode is
enabled.
Set the Dolby Vision mode.
2
Select the broadcast format
3
Select the HDMI output color space.
Select the HDMI output deep color mode.
NOTE
This function cannot be used if the HDMI Color Space is set to
"YCbCr422".
Turn frame rate conversion on/off for 1080P Blu-ray discs that play
back at 24 Hz.
p When Auto is selected, the 3D signal will automatically be
output when 3D video is played.
p When Off is selected, 3D signals will not be output.
1
of the device connected to the unit.
4