Tascam BD-MP4K Manual Del Usuario página 44

i Auto
Automatically acquire the IP address from a DHCP
server.
i Manual (see settings screen below)
The cursor buttons can be used to select the IP address,
subnet mask, default gateway, DNS 1 and DNS 2, and
the number buttons can be used to input values.
Press the RETURN button even during operation to return
to the previous screen.
When "IPv6 On" is set to "Enable", the setting method for
the IPv6 IP address can be selected in the "IPv6 Setting".
i Auto
Automatically acquire the IP address from a DHCP
server.
i Manual (see settings screen below)
The cursor buttons can be used to select the IP address,
prefix, gateway, DNS 1 and DNS 2, and the number buttons
can be used to input values.
Press the RETURN button even during an operation to
return to the previous screen.
p If "Wireless" is selected in the submenu Interface setting,
select "Wireless Setting" in the submenu to set the wireless
44
TASCAM BD-MP4K
connection. (The setting procedures are the same for the
Interface settings.)