Hansgrohe Axor Citterio 39133 1 Serie Instrucciones De Montaje página 8

4
2
5
6
1
8
1
1
2
English
Turn the valve stems to the off position.
Install the handles.
Secure the handle to the valve by rotating the
escutcheon clockwise.
Inspect the alignment of the handles.
If it is unsatisfactory, loosen the screws and rotate
the valve.
Tighten the tensioning screws using a screwdriver.
2
Install the pull rod.
Rest the spout assembly on the mounting surface.
Install the fiber washer, metal washer, and mount-
ing nut.
Tighten the mounting nut by hand.