Bluetooth ® Mode - DeWalt TSTAK DWST17510 Manual De Instrucciones

EN EN
Auto Seek:
. 1 Select Auto Scan. The stations are automatically scanned, until a station with strong and
clear reception is reached.
2. Once a desired station is reached, press and hold the touch button of the desired preset
number. A message Saved Preset # flashes, and the station number lights in yellow.
The station is stored in the displayed Favorites number (#).
3. Rotate the Selection Dial to scan to the next station.
a. Rotate clockwise to scan up the frequencies.
b. Rotate counterclockwise to scan down the frequencies.
4. Repeat steps 2 and 3 to set additional favorite stations.
Manual Seek:
Select Manual Scan.
. 1
. 2 Rotate the Selection Dial to search for the next station.
•
Rotate clockwise to go up the frequencies.
•
Rotate counterclockwise to go down the frequencies.
. 3 Once a desired station is reached, press and hold the touch button of the desired preset
number. A message Saved Preset # flashes, and the station number lights in yellow.
IMPORTANT RADIO NOTES
Reception will vary depending on location and strength of radio signal.
. 1
. 2 Playing the radio while connected to certain generators may cause background noise.
EXTERNAL DEVICES (BLUETOOTH®/AUX)
The TSTAK CONNECT RADIO + CHARGER can be used to play sound from an external device
®
through its built-in speakers via two connection options:
Bluetooth
• ®
3.5mm Auxiliary input jack
•
NOTE: The compartment can also be used to store, protect and charge portable audio

devices, such as a smartphone or MP3 player. The USB power port can charge/power most
devices that have a USB connection (5V/2.1A).
BLUETOOTH
The TSTAK ® CONNECT RADIO + CHARGER can connect to Bluetooth
The Bluetooth ® mode can store up to 6 paired users.
Blue
Off
20
MODE
®
Bluetooth
A blue LED indicates the Bluetooth
Bluetooth connected to Mobile App
Not connected (light does not need to be on for connecting to the device)
® enabled audio devices.
® LED
® status