System Settings; System Reset; Sound Settings - DeWalt TSTAK DWST17510 Manual De Instrucciones

EN EN

SYSTEM SETTINGS

The system settings screen includes configuring the following options: Language, Sys Beep,
Sleep and Sys Reset. Press the touch button of the function you wish to modify.
Language
Enables changing the interface language.
Rotate the Selection-Dial to choose the display language and push to select
. 1
. 2 Press the Back
System Beep
Enables setting the system to sound a beep when a touch button is pressed.
Press a touch button, ON or OFF, to select if a beep sound should be heard or not.
. 1
. 2 Press the Back
Sleep
Allows setting the option of having the system stop playing after a set duration, when the system
is in AUX mode.
AUX Sleep: press a touch button to select if ON or OFF.
Sleep Duration: press the touch buttons of the plus
decrease the value. The duration can be set to: 0 (sleep is disabled), 3, 5, 10, 15, 30, 60 or 120
minutes.

System Reset

To restore the appliance to its factory default settings. Selecting Sys Reset displays an approval
message: "Are you sure you want to Restore to default?"
Pressing the Yes touch button: all settings are restored to factory values.
. 1
Pressing the Cancel touch button: goes back to the Setting System screen.
. 2

SOUND SETTINGS

Sound preferences can be adjusted by changing the equalization of the Bass, Treble and
Mid-Range.
Press the touch buttons of the plus
. 1
. 2 Press the Back
22
button to return to the settings screen.
button to return to the settings screen.
or minus
button to return to the settings screen.
or minus signs to increase or
signs to increase or decrease the level.