Display Settings; Bluetooth ® Setting - DeWalt TSTAK DWST17510 Manual De Instrucciones

DISPLAY SETTINGS

The display Brightness and Auto Dim Display can be adjusted. In addition, you can select how
Flip Display operates when the appliance is positioned vertically.
. 1 Press the touch buttons of the plus
screen Brightness level.
Press the touch buttons of the plus
. 2
which the backlight of the buttons and touch buttons turn off and the display is dimmed.
The duration can be set to: 0 (always on), 60 ,30 ,15 ,10 ,5 ,3 or 120 minutes.
. 3 Press the touch buttons of the AUTO or Manual
automatically when the appliance is standing vertically.
4. Press the Back button to return to the settings screen.
BLUETOOTH SETTING
®
Selecting Bluetooth opens the Bluetooth
®
connect. For details, see Bluetooth
AM SETTING
Selecting AM opens the AM settings screen for selecting between: Auto Seek or Manual Seek.
For details, see AM/FM Radio above.
TROUBLESHOOTING
WEAK BATTERY PACKS
Weak batteries will continue to function but should not be expected to perform as well. When the
appliance is powered by a battery pack and its charging level falls below 20%, the low battery
indicator is displayed.
BATTERY PACK PROTECTION
To protect the life of the battery pack, the appliance will shut off when the battery's charging level
becomes too low. If this happens, connect the TSTAK
outlet with the AC/DC power adaptor and charge the battery pack.
MUSIC STOPS
When dropping the appliance in its vertical position the battery pack may disconnect from its
receptacle. If the music is operated by the battery pack, the music will stop. To resume, open the
cover and reposition the battery pack.
or minus signs to increase or decrease the
or minus signs to set the Auto Dim duration, after
sign to select if the display flips
settings screen for selecting which mobile device to
®
Mode above.
®
CONNECT RADIO + CHARGER to an
®
EN EN
23