DeWalt TSTAK DWST17510 Manual De Instrucciones página 21

Connecting to Bluetooth
. 1 Press the Home button
. 2 Press the Bluetooth
®
Enable Bluetooth discovery on the audio device you wish to connect.
. 3 ®
Scan for the TSTAK
. 4 ®
XXXX is an identifier of the device) and select it.
Once paired and connected, the connected device name is displayed on the screen.
Disconnecting the Connected Device
From the Bluetooth screen press the Bluetooth
®
changes from yellow to gray.
Changing the Connected Device
From the Bluetooth
. 1 ®
mobile devices appears.
Press the touch button next to the required user name. The device will be discovered and
. 2
connected (if Bluetooth
Playing Audio through Bluetooth
Any audio (as music) stored on a mobile device that is connected via Bluetooth
CONNECT RADIO + CHARGER can be streamed from the connected device to the TSTAK
CONNECT RADIO + CHARGER.
After connecting a mobile device via Bluetooth® do one of the following:
• Press the Selection Dial to play the last played song.
The song name is displayed on the screen.
• Press the Left or Right buttons
CONNECTING AN AUXILIARY AUDIO DEVICE
. 1 Connect a 3.5 mm audio cable (not provided) between the 3.5mm Auxiliary input jack and
the output jack of your audio device.
Press AUX as the audio source. The screen displays an AUX figure.
. 2
. 3 Operate the audio through the connected device.
APPLIANCE SETTINGS
Press the Home button
. 1
Press the Settings touch button
. 2
Settings to the following can be performed: System, Sound, Display, Bluetooth
®
and select BT as the audio source.
touch button to disconnect any other connected device.
CONNECT RADIO + CHARGER, display name: TSTAK_XXXX (where
®
screen, press the settings
is enabled on the audio device).
®
®
to move up/down your songs (audio) list.
touch button. The Bluetooth
touch button. A list of all recognized
EN EN
LED
®
to the TSTAK
® ®
®
, AM and FM.
®
21