First Use - DAS NOVAFON Manual Del Usuario

vibrations into the tissue. The DAS NOVAFON sound wave device is
used mainly for pain therapy and neurorehabilitation. Thanks to its
safe and simple application, local vibration therapy can be used in
many ways. The device is equally suitable for professional use and
home use. The DAS NOVAFON sound wave device can be used in
speech therapy, occupational therapy and physiotherapy as well as
for private use at home. The two treatment frequencies (50 Hz and
100 Hz) and three intensity levels for each frequency (light, medium,
strong) allow the treatment to be individually adapted to the body part
to be treated and the underlying symptoms.
2.3. ACCESSORIES
The DAS NOVAFON sound wave device is equipped with two inter-
changeable attachments as standard. NOVAFON GmbH also offers
other attachments that are not included in this set. Please contact
your dealer or visit www.novafon.de for more information. NOVAFON
devices may only be used with original NOVAFON accessories. The
use of accessories from other manufacturers can impair the function
and performance of NOVAFON devices.
2.3.1. Disc attachment
The disc attachment is used in the treatment of larger body parts that
require broader strokes. It is supplied as standard and also available
as a spare part.
2.3.2. Ball attachment
The ball attachment can be used for smaller areas and targeted treat-
ment. It is supplied as standard and also available as a spare part.
2.3.3. Optional accessories
On our website you will find additional attachments for various treat-
ment goals. There is also a charging stand and USB cover caps for
your battery-powered DAS NOVAFON device.
The supplied adapter can be used for Sensi-Roller and intraoral
attachment.
3. OPERATION

3.1. FIRST USE

Charge the device fully before using it for the first time (section 3.3).
Switch on the DAS NOVAFON by pressing the on/off button once de-
vice. The device starts at 100 Hz ( ) by default. Pressing the button
again decreases the frequency to 50 Hz ( ). The current frequency se-
lection is indicated by the LED display (frequencies). Press the button
a third time to switch off the device.
3.2. ADJUSTING THE INTENSITY
Adjust the intensity by pressing the Intensity setting button repeatedly.
You can select between three intensity levels: light ( ), medium ( )
and strong ( ). The intensity level is indicated by the LED display (fre-
quencies). The device always starts at the lowest intensity level ( ).
This also corresponds to the NOVAFON treatment recommendation,
i.e. starting with a low intensity and gradually increasing it according