Display Instruction - mundoclima MUPIR-H9 Manual De Instalación Y Usuario

6.1.2 Display and Operation Surface
Alarm
Water inlet temp.
Notes:
1. If the unit is OFF the operating mode is displayed without temperature displaying, and the
unit output rate will be display 0%.
2. When the unit has some problem, the icon
will display P (Protection) or E (Error), and the icon in the left of the icon.

6.2 Display Instruction

6.2.1 Instruction for Buttons
ON/OFF: Short-press to turn. Also user can press this button to exit when they finish
setting or checking.
Running Modes: Short-Press to turn. Long-Press to into menu.
Increase: Temperature set + or previous one.
Decrease: Temperature set+ or next one.
Boost Running mode: Short-press to enter into Boost mode.
Boost
Smart Running mode: Short-press to enter into Smart mode.
Smart
Silent Running mode: Short-press to enter into Silent mode.
Silent
SILENT mode
Auto mode
Cooling mode
BOST SMART
mode mode
Heating mode
will flash, and the icon in the left of the icon
46
Capacity
Wifi conection
Water outlet temp.