User Settings - Health O Meter Pro Plus 2650KL Manual De Operación

OPERATION INSTRUCTIONS
03 UI Test
07

USER SETTINGS

01 Retain Entered Values
The scale has a diagnostic routine where it tests the User
Interface (UI) hardware functionality (LCD, keypad). In order to
do this the user has to press all the keys according to the
messages displayed on the screen.
If the requested command was not received or wrong button
was pressed, the following message will be displayed.
If after 10 seconds the requested command was not received,
the following message will be displayed. If "UI Error Failure" is
displayed, refer to qualified service personnel.
This option allows the user to use the same values for ID,
height and TARE between weighing. If this option is disabled,
the user has to re-enter these values for each reading. If the
values are not entered, only the weight is stored.
NOTE: These values cannot be retained by ID number.
16