Operation Instructions - Health O Meter Pro Plus 2650KL Manual De Operación

OPERATION INSTRUCTIONS

1. Press the ON/OFF button to turn the scale on.
2. Wait until "000
Lb
3. If the wheelchair weight is known, enter the TARE value according to instructions in the
"Menu", para 02. If the wheelchair weight is unknown, place the wheelchair only on the
platform; press REWEIGH. Enter the Automatic TARE by pressing the TARE button.
4. Move the wheelchair and patient onto the platform over the ramp until the front wheelchair
wheels are stopped by the platform guardrail. The display should read "WEIGHING" until
the weight of the patient is displayed.
5. We recommend reweighing after the patient is sitting still on the wheelchair on the platform
by pressing the REWEIGH button.
6. Remove the wheelchair and patient from the scale by moving straight back off the ramp.
NOTE: The scale will always default to the settings and units last used.
00 " and "ZERO" on the left side of the display will appear.
oz
7