D-Link DCS-8200LH Guia De Instalacion página 4

WPS SETUP
Alternatively, you may create a WPS connection if your router or access point supports WPS. To
create a WPS connection:
Step 1:
Press and hold the WPS button on the back of the camera for three seconds. The green WPS status
LED above the button will blink.
Step 2:
Press the WPS button on your wireless router or access point within 60 seconds. On some routers,
you may need to log into the web interface and then click an onscreen button to activate the WPS
feature. If you are not sure where the WPS button is on your router or access point, please refer to
your router's user manual.
The DCS-8200LH will automatically create a wireless connection to your router. The green LED will
flash while the camera is connecting, and will turn solid green when the camera is connected.
4
DCS-8200LH