Innotek UltraSmart IUT-300E Manual De Instrucciones página 3

INNOTEK
Quick Start Guide
Step 1
Power Up
Remote: Insert 12v alkaline battery in the handheld remote. Replace the access
panel.
Collar: Charge the collar on the power outlet-mounted charging station. The light
on the collar will glow red while charging, and green when fully charged.
Step 2
Turning the collar ON and OFF
a. Press the
twice until appears in the display.
b. Hold the collar one inch from the remote, taking care not to touch the
metal contacts that touch your dog's skin.
c. Press the
start-up tone, and the light will glow solid green.
d. To
the
NOTE: To use two collars, repeat the procedure with the second collar.
This ON/OFF command only works when remote and collar are in close proximity; it will not work at a
distance. Never turn the unit ON/OFF while your dog is wearing the collar.
® UltraSmart ™ Micro Remote Trainer, 275m
button (for collar) on the remote once or
button. The collar will emit a
turn collar OFF, hold
button. The collar will emit a shut-down tone, and the light will glow solid red, then go out.
2
collar and remote one
IUT-300E
inch apart and press