Electrical Characteristics - Hioki CM4371 Manual De Instrucciones

Specifications
Dustproof and waterproof Jaw, barrier: IP50

Electrical Characteristics

Display update rate
(measured value)
Maximum terminal-to-
terminal rated voltage
Maximum rated voltage
to earth
Rated supply voltage
40
Grip: IP54 (when measuring an insulated conductor only)
Risk of electric shock from the conductor being measured increases when wet.
• Measured value excluding electrostatic capacity, frequency, and temperature:
5 times/s (after the range is fixed)
• Electrostatic capacity: 0.5 to 5 times/s (The number of times varies depending
on the capacitance.)
• Frequency: 0.3 to 5 times/s (The number of times varies depending on the
capacitance.)
• Temperature: 1 times/s (including thermocouple wiring break check)
(Defined within the measurement range (excluding range changes)).
1000 V AC (up to 1 kHz) /1700 V DC
1000 V AC (Measurement category III)
600 V AC (Measurement category IV)
Anticipated transient overvoltage: 8000 V
1.5 V DC ×2
LR03 Alkaline battery ×2