Klein Tools CL310 Manual De Instrucciones página 10

enGliSH
ac current (leSS tHan 400a)
AC Current is measured by pressing the clamp trigger
the clamp and placing it around a current-carrying wire. When
measuring, care should be taken to ensure that the clamp is
completely closed with trigger
passes perpendicularly through the center of the clamp in line with passes perpendicularly through the center of the clamp in line with
the arrow markings
To measure current:
1. Rotate the Function Selector switch
2. Place clamp around wire. The current measurement will be shown
in the display.
note: If the measurement is less than 40A, rotate the Function
Selector switch
measurement is less than 4A, rotate the Function Selector switch
to the 4 A setting for improved resolution.
Disconnect test leads when measuring with the clamp.
10
operatinG inStructionS
. .
11 11 11
to the 40 A setting for improved resolution. If the
2
fully released, and that the wire
10
2 to the 400 A setting.
or
to open
10
2