zanardi P.M.G. Instrucciones Para Uso Y Mantenimiento página 16

Accessories shipped together with the inverter:
Input cable
Battery cable
Communication + battery cable
T connector to put two devices on the same CAN bus communication (one device per row)
Always the same order have to be used:
The wirings included on the inverter side use a female connector with wires with this order:
Pin 1 – red – +12V INV. SUPPLY
Pin 2 – white- CAN_H
Pin 3 – green – CAN_L
Pin 4 – black – 0V INV. SUPPLY
Connection between cable coming from inverter and cable coming from motor control board:
16 Inverter manual rev.01/19