Ks-Mobil Easy With Hand Pump; Initial Setup - CEMO KS-Mobil Easy 120 l Manual De Instrucciones

GB

3.2 KS-Mobil Easy with hand pump

9
Fig. 3.2 KS­Mobil Easy with hand pump

Ventilation valve

Filling opening (without cap)

Delivery nozzle

Delivery line ball valve

Earthing cable 2 m

Dipstick

Hand pump

Hand pump lever

Recess for tensioning belts
22
6 2
1
4
5
3
7
8

4. Initial setup

1. Filling station with electric pump:
• For use in Ex-zone 2 (see section 1.2):
Have both supplied terminal clamps
(red +, black ­) installed on the connection
cable of the electric pump by a qualified
electrician.
• For use in Ex-zone 1 and higher (see section
1.2):
Have a plug connector (plug / socket) with Ex
protection installed on the connection cable of
the electric pump by a qualified electrician.
2. Affix stickers (stickers are enclosed with the tank
documentation).
The KS­Mobil Easy 120 l must be permanently
provided with sticker UN 1203 for petrol and the
hazard label (flame on red background) on
the rear.
80 mm
UN number
The KS­Mobil Easy 190 l must be permanently
provided with sticker UN 1203 for petrol and the
hazard label (flame on red background) on
the front.
UN number
3. Fill the tank (see section 5.4).
i
Important!
Please always use an automatic delivery
nozzle to avoid overflows.
Hazard label
Hazard label