General; Safety; Maintenance And Monitoring; Using Original Parts - CEMO KS-Mobil Easy 120 l Manual De Instrucciones

1. General

The mobile fuel filling station is state of the art
technology and complies with approved technical
safety regulations.
The filling station carries the CE symbol, i.e. the
EU directives and harmonised standards of
relevance to the filling station were applied during
design and manufacture.
Proper and professional manufacture, the required
measures for safe use in respect of the risk of
explosion in accordance with the Occupational
Safety Regulations (BetrSichV) and water­pollution
prevention in accordance with the German Water
Management Act (WHG) are confirmed for the
filling station by TÜV­Süd.
The filling station may only be used in a technically
flawless condition in the version delivered by the
manufacturer.
For safety reasons, modifications are not allowed
to the filling station (except for the addition of
accessories specially provided by the manufac­
turer).

1.1 Safety

Each filling station is tested for function and
safety before despatch.
The filling station is safe to operate when used
correctly.
Incorrect operation, failure to follow the safety
instructions or misuse poses a dangerous risk
with regard to:
• serious or fatal injury to the operator.
• the filling station and other assets of the operator.
• the function of the filling station.
In order to avoid risks to people, animals and
property, please read these operating instructions
prior to using the filling station for the first time,
in particular all safety notices.
As the operator of the filling station, you are
responsible for ensuring that
• all safety instructions are understood and
complied with.
• the valid rules of occupational safety and
explosion protection are complied with.
• personal protective equipment is used in
accordance with the safety datasheet for the
fuel being used.
• only instructed persons operate the filling station
(see section "Operating the filling station").

1.1.1 Maintenance and monitoring

The filling station must be regularly checked to
ensure it is in a safe condition.
This check includes:
• a visual inspection for leaks (seal of filling hose
and fittings).
• a function test.
• completeness / identifiability of the warning, man­
datory and prohibitory signs on the installation.
• the prescribed inspections (for details see section
"Maintenance and inspection").

1.1.2 Using original parts

Please only use original parts provided or recom­
mended by the manufacturer. Also take note of all
safety and usage information provided with these
parts.
This applies to:
• spare and wearing parts.
• parts for accessories.

1.1.3 Operating the filling station

In order to avoid any hazards due to incorrect
operation, the filling station may only be operated
by individuals who
• have read and understood the
operating instructions.
• have proven their ability to operate
the equipment.
• have been assigned to operate the equipment.

Important!

i
Die Betriebsanleitung muss für jeden
Benutzer gut zugänglich sein.

1.1.4 Warning notices on the filling station

The warning signs on the installation must
always be affixed and legible.
Signs affixed by the manufacturer:
Ban on fire, naked flames
and smoking
Application:
to the front side of the tank
Warning against hand injuries
Application:
on the underside of the lid (can be
seen when the lid (optional) is open)
GB
17