Electrical Connections - Proline PGH4FGL-FR Manual De Instrucciones

Accessories
Bracket x 4 Screw x 4
Sponge (4)
Elbow LPG gas injector x 4

ELECTRICAL CONNECTIONS

Any electrical work required to install this hob should be carried out by a qualified
electrician or competent person in accordance with the local regulations.
THE HOB MUST BE EARTHED.
Before switching on, make sure the electricity supply voltage is the same as that
indicated on the hob rating label.
Ensure that the hob supply cable does not come into contact with surfaces with
temperatures higher than 50°C.
INSTALLATION
This appliance must be installed by a competent person as stated in the local
gas safety standards and regulations and only used in a well ventilated space. Ensure
that once the hob is installed, it is easily accessible for the engineer in the event of a
breakdown.
Before installation, ensure that the gas and electrical supply comply with the type
stated on the rating label.
The manufacturer declines any liability should the safety measures not be observed.
Protect your appliance against atmospheric effects. Do not expose it to sun, rain, snow,
etc.
Warnings
Prior to installation, ensure that the local distribution conditions (nature of the gas and
gas pressure) and the adjustment of the appliance are compatible.
This appliance is not connected to a combustion products evacuation device. It shall be
5