Ordering Software; Spare Parts - Resol KM2 Manual De Instrucciones

Problem Solution
The KM2 Commu- In order to check if the proxy server settings for the
nication module is Internet browser are correct, proceed as follows:
not found by the
Î Open the Internet browser.
DeviceDiscoveryTool.
Î In the Extras main menu, select the Settings submenu.
Î In the Advanced... main menu, select the Network
submenu.
Î Click the LAN Settings button.
Î Close all windows by clicking OK.
Î Alternatively use the WLAN connection.
Signal strength of the Î Use the device in another location.
WLAN too low.
The VBus ®
The status LED is If all network settings are changed, it might occur that the
green although no con- status LED is not able to signal this change.
nection is available.
Î Restart the device.
No connection to Î If the Communication module is connected via WLAN
VBus.net possible. and LAN and if one of the connection is then discon-
nected, restart the device.
Î Use one connection type only.
38
cable can be extended to up to 50 m.
9

Ordering software

For an expense allowance of EUR 20,-, a DVD containing the source code and
the compiler scripts of the open source applications and libraries can be ordered.
Please send your order to:
RESOL – Elektronische Regelungen GmbH
Heiskampstraße 10
45527 Hattingen
GERMANY
Please name the version number of the firmware in your order. It can be found in
the web interface, main menu About, submenu General, bottom area (e.g.: „1.0
(200805241128")). Per order, only one version number can be named.

10 Spare parts

VBus cable
®
Article no.:112 091 98
Mains adapter 12V DC/1A ZDD
Article no.: 11209199