Package Contents; Hardware Installation - D-Link DCS-6620G Guía De Instalación Rápida

Quick Installation Guide

Package Contents

If any of the items are missing, please contact your reseller.
DCS-6620G CD-ROM
with Manual
Wireless PTZ
and
Internet
Software
Camera &
Remote
Control

Hardware Installation

Connect the Ethernet Cable
Connect an Ethernet cable to the Ethernet connector located on
the Internet Camera's back panel and attach it to the network.
Attach the External Power Supply
Attach the external power supply to the DC power input connector
located on the Internet Camera's back panel(labeled DC 12V) and
connect it to an AC power outlet.
Both the red and green LEDs will flash alternately and only the red
LED will remain lit. The green LED will not come on until you have
configured your camera.
If you already connect your device correctly, please refer to the Manual in the CD for software utility
installation step by step. You will install a software and use it to search and connect the camera.
DCS-6620G
Wireless PTZ Internet Camera
A/V Cable &
Category 5
Ethernet
Cable
Power
Adapter
1
2 Antennas Camera
Stand