Denon AVR-3802 Instrucciones De Operación página 20

ENGLISH
5 Use the D and H cursor buttons to select the
mode for the button at which the system call
signals are to be registered, then press the
ENTER button.
TUNING
ENTER
BAND MODE
SHIFT
TUNING
6 "SELECT KEY" is displayed. Press
ENTER
the button at which the system call
SHIFT
signals are to be registered, then
press the ENTER button.
• "ENTER KEYS" is displayed, then
the mode display appears.
NOTES:
• The remote control signals of the buttons pressed while registering the system call signals are emitted, so
be careful not to operate the components accidentally (cover the remote sensors, for example).
• If you exceed the number of signals that can be registered, "FULL" appears on the remote control unit's
display and only the number of signals that can be registered are registered (up to 29 operations).
(3) Using the system call function
1 Press the button at which the system call signals have been stored.
• The stored signals are transmitted successively.
Resetting
(1) Resetting the system call buttons
1
Press the power ON/SOURCE button and the
OFF button at the same time.
• "SET UP" appears on the remote control
unit's display.
ON /
OFF
SOURCE
2
Press the ENTER button.
ENTER
SHIFT
3
Use the D and H cursor buttons to display
"RESET" on the remote control unit, then press
the ENTER button.
TUNING
ENTER
BAND MODE
SHIFT
TUNING
20
7 q Press the mode selector button according to
the button with the remote control signals to
be registered.
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP DVD
w Press the buttons with the remote control
signals to be registered one at a time.
8 Press the ENTER button.
ENTER
• "COMPLETE" appears on the
SHIFT
remote control unit's display and
registration is completed.
POWER
1
ON /
OFF SOURCE
RC-884
REMOTE CONTROL UNIT
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP DVD
DISPLAY MENU
SURR.
OSD
PARA.
SETUP RETURN
TUNING A/B
3, 4, 5
MEMORY
BAND MODE
CHANNEL VOLUME
TUNING
+
+
2, 3, 4, 5, 6 SKIP ENTER
-
SHIFT -
SKIP MUTING
TUNER PHONO CD
1 2 3
CDR/TAPE VDP DVD
4 5 6
VCR-1 VCR-2/V.AUX TV/DBS
7 8 9
TV/
0 +10
VCR
RDS PTY RT
TEST
SPEAKER OUTPUT
TONE
SURROUND
DOLBY/DTS DSP 5CH / 7CH
SURROUND SIMU. STEREO
6.1 / 7.1
DIRECT STEREO
SURROUND
INPUT
MODE ANALOG EXT.IN
SYSTEM CALL
CALL 1 CALL 2 BACKLIGHT
4 Use the D and H cursor buttons to display
"RESET SYS" on the remote control unit, then
press the ENTER button.
• "SYS SEL" appears on the remote control
unit's display.
TUNING
ENTER
BAND MODE
SHIFT
TUNING
The remote control unit's display switches
as shown below each time the D and H
cursor buttons are pressed.
RESET PRE RESET LRN
RESET ALL RESET SYS
5 Press the D and H cursor buttons
TUNING
to select the system call setting
to be reset.
BAND MODE
TUNING
The remote control unit's display switches
as shown below each time the D and H
cursor buttons are pressed.
SYS MODE SYS CALL 1
SYS CALL 2
(2) Resetting the preset memory
1
Press the power ON/SOURCE button and the
OFF button at the same time.
• "SET UP" appears on the remote control
unit's display.
ON /
OFF
SOURCE
2
Press the ENTER button.
ENTER
SHIFT
3
Use the D and H cursor buttons to display
"RESET" on the remote control unit, then press
the ENTER button.
TUNING
ENTER
BAND MODE
SHIFT
TUNING
q To reset CALL 1 or CALL 2, select "SYS
CALL 1" or SYS CALL 2", then press the
ENTER button.
ENTER
SHIFT
w To reset system call settings registered at
other buttons, select "SYS MODE", press
the ENTER button, press the mode button at
which the button is registered, then press
the ENTER button again.
ENTER
SHIFT
6 "CONFIRM" is displayed. To reset the setting,
press the ENTER button while "CONFIRM" is
displayed.
• "SYS SEL" appears on the remote control
unit's display.
ENTER
SHIFT
POWER
1
ON /
OFF SOURCE
RC-884
REMOTE CONTROL UNIT
TV
CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP DVD
DISPLAY MENU
SURR.
OSD
PARA.
SETUP RETURN
TUNING
A/B
3, 4, 5
MEMORY
BAND MODE
CHANNEL VOLUME
TUNING
+
+
2, 3, 4, 6, 7 SKIP ENTER
-
-
SHIFT
SKIP MUTING
TUNER PHONO CD
1 2 3
CDR/TAPE VDP DVD
4 5 6
VCR-1 VCR-2/V.AUX TV/DBS
7 8 9
TV/
0 +10
VCR
RDS PTY RT
TEST
SPEAKER OUTPUT
TONE
SURROUND
DOLBY/DTS DSP 5CH / 7CH
SURROUND SIMU. STEREO
6.1 / 7.1
DIRECT STEREO
SURROUND
INPUT
MODE ANALOG EXT.IN
SYSTEM CALL
CALL 1 CALL 2 BACKLIGHT