How To Mount - Friedrich MD12Y3JM Manual De Instrucciones

Installation

How to mount

The wall you select should be strong and solid enough to prevent vibration
1. Mount the installation plate on the wall with
type "A" screws. If mounting the unit on a concrete wall, use anchor bolts.
• Mount the installation plate horizontally by aligning the centerline using a level.
2. Measure the wall and mark the centerline. It is also important to use caution concerning the
location of the installation plate-routing of the wiring to power outlets is through the walls
typically. Drilling the hole through the wall for piping connections must be done safely.
<Type 1>
Installation Plate
Enganche
del chasis
Left rear piping
<Type 2>
Installation Plate
Enganche
del chasis
16 Multi zone
Unit Outline
442(17 13/32)
Ø70
(2 3/4)
133(5 1/4)
175(6 7/8)
Unit Outline
460(18 1/8)
Ø70
(2 3/4)
Left rear piping
69(2 23/32)
105(4 1/8)
Type "A" Screws
Place a level on raised tab
Installation Plate
Type "A" Screws
Place a level on raised tab
Installation Plate
Measuring Tape
Measuring Tape
Hanger
Right rear piping
442(17 13/32)
Ø70
(2 3/4)
95(5 3/4)
217(8 17/32)
570(22 7/16)
Ø70
(2 3/4)
Right
rear
piping
56(2 7/32)
207(8 5/32)