Luda Elektronik horseAlarm Guia Del Usuario página 14

5. Place the transmitter according to the picture below, to simulate that the horse is lying down:
Watch how the horse lies down on the display. Shortly the position alarm will go on in the
receiver, shown by the red light and the beeping.
To turn off the alarm, turn the transmitter upright (with the logo up) and press the (C) button.
For highest possible security the transmitter continues to send the alarm 3 times, (in
case the first alarm would not reach the receiver because of unpredicted interference). This
means that you will have to turn off the alarm 3 times by pressing button (C).
6. To easily demonstrate the sweating alarm, set the sweating level to a low level (such as 2
or 3), by pressing the (A) button until the number in the circle on the right side of the display is
2 or 3.
After you have set the sweating alarm level on the receiver, grip one of the sweating sensors
as in the picture below:
- 14 -