Magnavox 50MF231LD Guia Del Usuario página 33

Automatic software upgrade procedure
For an automatic software upgrade copy the "autorun.upg" file in the root
directory of the USB portable memory.
O Power off your TV and remove all memory devices,
Insert the USB portable memory that contains the downloaded software
upgrade.
Switch on your TV with the power switch I O at the right side of the TV.
At startup the TV will scan the USB portable memory until it finds the
update content. The TV will automatically go to the upgrade mode, After a
few seconds it will display the status of the upgrade procedure.
O
Warning:
• You c_mnot c_llowed to remove the USB portable memory dunng the software
up,_rade procedu!e
• In case o/'a power drop durfng the upy¢_de procedure! don't remove the USB
portable memory from the TK The TV will continue the upgrade as soon as the
power comes back.
• If you tn/to upgrade to a software version lower than the current version, a
confirmation will be asked. Downgrading to older software should only be done in
case of real necessity.
• If an error occurs during the upgrade you should retry the procedure or contact
your dea/en
When the software upgrade was successful, remove the USB portable
memory and restart your TV with the power switch (_ at the right side of
the TV.
Your TV will start up with the new software.
Note: Once the up<_mdeis _nished use your PC to remove the TV so_/am from
your USB portable memory.
Manual software upgrade procedure
For a manual software upgrade copy the "autorun.upg" file in a directory
called "Upgrades" located in the root of the USB portable memory.
Insert the portable memory that contains the downloaded software
upgrade.
The TV will automatically start the content browser menu. Exit the menu
by pressing the MYCONTENT key.
Select Software Upgrade in the Installation menu. Go to Local upgradesl
applications.
The TV will list all compatible images available on the USB portable memory
and display the data for each selected upgrade image.
_Jl Select the correct upgrade image and press the red color button to start
the upgrade,
Your TV will restart and will automatically go to the upgrade mode. After a
few seconds it will display the status of the upgrade procedure.
Warning:
If you try to upgrclde to a sofiwc_re version equc_lor lower than the currant version,
a confirmation will be asked, Downgrading to older software should only be done in
case of real necessity.
Q
When the software upgrade was successful, remove the USB portable
memory and restart your TV with the power switch (2) at the right side of
the TV.
Your TV will start up with the new software.
30
I English DFU 37131.indd 30 k_ 2006-03-29 6:31:06 PM I