Understood Everything; Before Use; Changing Sanding Sheets; Selecting Rotation Speeds And Sanding Sheets - Parkside XQ600 Instrucciones De Utilización Y De Seguridad

Lijadora excéntrica
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

General safety advice / Before use / Commissioning

Understood everything?

Q
J
You may begin to work with the appliance when
you have familiarised yourself with the instructions,
functions and handling of the appliance. The
safest work is possible by heeding all informa-
tion and instructions of the manufacturer.

before use

Q

Changing sanding sheets

Q
WArnIng!
Before carrying out work on the
appliance, always remove the plug from the power
socket.
The rotary sander is fitted with a velcro rapid attach-
ment, making possible a quick and easy exchange
of sanding sheets.
note: Before securing a new sanding sheet
remove all dust and dirt from the sander plate
j
Ensure that the openings in the sanding sheet
concur with the boreholes of the sanding plate
Selecting rotation speeds
Q
and sanding sheets
removal rate and surface quality
The removal rate and the surface quality are deter-
mined by the rotation speed and the gritting of the
sanding sheet.
j
Please take note that, for working the various
materials, you must select the appropriate
sanding sheet, one with a suitable gritting, and
match it to an appropriate rotation speed.
Material / Working
range
Rough finish (Gritting)
Fine finish (Gritting)
Rotation speed preselection
30 GB/MT
,
9
.
8
9
8
Softwood
60
240
high (
+)
E
Material / Working
range
Rough finish (Gritting)
Fine finish (Gritting)
Rotation speed preselection
Material / Working
range
Rough finish (Gritting)
Fine finish (Gritting)
Rotation speed preselection
Material / Working
range
Rough finish (Gritting)
Fine finish (Gritting)
Rotation speed preselection
Material / Working
range
Rough finish (Gritting)
Fine finish (Gritting)
Rotation speed preselection
.
These are noncommittal declarations and recommen-
dations.

Commissioning

Q
The voltage of the power source must tally with the
details given on the rating plate of the appliance.
Appliances requiring 230 V can also be run on 220 V.

Switching on and off

Q
notice! Always switch the rotary sander on be-
fore applying it to the material to be worked, then
make contact with it.
When operating the device you can select be-
tween intermittent or continuous operation mode
to switch on intermittent operation mode:
j
Press the On / Off switch
Hardwood
60
180
high (
+)
E
Abrade varnish
180
400
medium (-
)
F
remove paint / varnish
40
80
medium to high
Metals
80
240
medium to high
.
2

Publicidad

Tabla de contenido
loading

Tabla de contenido