Vacuum Motor Maintenance - Clarke Carpet Master 30 Libro De Instrucciones

MAINTENANCE
WEEKLY:
1. Inspect and clean the two vacuum inlet filters. Remove
the cover for the machine. The filters are now accessible
(figure 7). They are constructed of foam attached to
plastic mounting rings. Slide the filters off and clean by
shaking or vacuuming. Replace if there are any rips, tears
or can't be cleaned.
2. Inspect and clean the exhaust filter. It is located under
the handle on the top of the machine (figure 8). Remove
the filter and clean by shaking, vacuuming or washing
with water. Replace if there are any rips, tears or if it can't
be cleaned.

VACUUM MOTOR MAINTENANCE:

Have the vacuum motor inspected annually by a factory autho-
rized service technician. If the carbon brushes are worn, they
should be replaced. This service will prolong the life of the
motor.
®
Clarke
Operator's Manual (EN) - Carpet Master 30
ENGLISH
Vacuum Inlet Filter (2)
Figure 7
Exhaust Filter
Figure 8
EN
- 7 -