Gima KD-595 Guía De Uso página 36

table 4
For ME EQUIPMENt and ME SYStEMS that are not LIFE-SUPPOrtING
recommended separation distances between portable and mobile rF
communications equipment and the KD-595
the KD-595 is intended for use in an electromagnetic environment in which
radiated rf disturbances are controlled. the customer or the user of the
KD-595 can help prevent electromagnetic interference by maintaining
a minimum distance between portable and mobile rf communications
equipment (transmitters) and the KD-595 as recommended below, accor-
ding to the maximum output power of the communications equipment.
rated maximum
output power
of transmitter
W
0,01
0,1
1
10
100
for transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be determined using the equation applicable to the frequency
of the transmitter, where P is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer.
Note 1: at 80 mHz and 800 mHz, the separation distance for the higher frequency range applies.
Note 2: these guidelines may not apply in all situations. Electromagnetic propagation
is affected by absorption and reflection from structures, objects and people.
ENGLISH
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d = 1.2 √ P
0,12
0,38
1,2
3,8
12
80 MHz to 800 MHz
d = 1.2 √ P
0,12
0,38
1,2
3,8
12
800 MHz to 2,5 GHz
d = 2.3 √ P
0,23
0,73
2,3
7,3
23
36