Mechanical Installation; Electrical Installation - Command - WEG SRW 01-UC Guía De Instalación, Configuración Y Operación

2. MECHANICAL INSTALLATION

The Control Unit (UC) can be installed in any position:
- Mounted on a 35 mm (1.38 in) DIN rail;
- Fixed by means of M4 screws and screw fixing adapter (PLMP).
35 mm (1.38 in) DIN rail installation

3. ELECTRICAL INSTALLATION - COMMAND

The Control Unit
block XC1, and A2 from terminal block XC6.
XC6
A2
6
Control Unit (UC)
Figure 1:
(UC) is energized through terminal A1 from terminal
XC1
A1
XC2
Installation with M4 screws
installation
S1 S2 I1 I2 I3 I4 IC A1
A B PE BK BU SH WH
A2 C1 O1 O2 C3 O3 C4 O4
XC1
RD
XC2
XC6