Adjusting The Picture's Sharpness Manually (Phase/Pitch) (For Pc 2 Only); Adjusting The Picture's Position Manually (H Center /V Center) (For Pc 2 Only) - Sony MFM-HT205 Manual Del Usuario

x Adjusting the picture's sharpness manually
(Phase/Pitch) (for PC 2 only)
You can adjust the picture's sharpness as follows.
1 Set the resolution to 1,680 × 1,050 on the computer.
2 Load the CD-ROM.
3 Start the CD-ROM and display the test pattern.
For Windows User
When Auto run operates:
1 Click Display Adjustment tool (Utility).
2 Click "Adjust" and confirm the resolution and then click
"Next."
Test pattern for Pitch and Phase appears in order.
When Auto run fails to operate:
1 Open "My Computer" and right click the CD-ROM icon.
Go to "Explorer" and open the CD-ROM icon.
2 Open [Utility] and then select [Windows].
3 Start [Win_Utility.exe].
Test pattern appears.
For Macintosh user
1 Open [Utility] and then select [Mac].
2 Start [Mac_Utility.exe].
Test pattern appears.
4 Press the MENU button.
The main menu appears on the screen.
5 Press the M/m buttons to select
press the OK button.
The "Screen" menu appears on the screen.
6 Press the M/m buttons to select "Phase" and press
the OK button.
The "Phase" adjustment menu appears on the screen.
7 Press the M/m buttons until the horizontal stripes
are at a minimum.
Adjust so that the horizontal stripes are at a minimum.
8 Press the OK button.
The main menu appears on the screen.
If vertical stripes are observed over the entire screen, adjust
the pitch using the following procedures.
9 Press the M/m buttons to select "Pitch" and press
the OK button.
The "Pitch" adjustment menu appears on the screen.
10 Press the M/m buttons until the vertical stripes
disappear.
Adjust so that the vertical stripes disappear.
11 Click [END] on the screen to turn off the test pattern.
x Adjusting the picture's position manually
(H Center /V Center) (for PC 2 only)
If the picture is not in the centre of the screen, adjust the picture's
centring as follows.
1 Set the resolution to 1,680 × 1,050 on the computer.
2 Load the CD-ROM.
3 Start the CD-ROM and display the test pattern.
For Windows User
When Auto run operates:
1 Click Display Adjustment tool (Utility).
2 Click "Adjust" and confirm the resolution and then click
Test pattern for H Center and V Center appears in order.
(Screen) and
When Auto run fails to operate:
1 Open "My Computer" and right click the CD-ROM icon.
2 Open [Utility] and then select [Windows].
3 Start [Win_Utility.exe].
Test pattern appears.
For Macintosh user
1 Open [Utility] and then select [Mac].
2 Start [Mac_Utility.exe].
Test pattern appears.
4 Press the MENU button.
The main menu appears on the screen.
5 Press the M/m buttons to select
press the OK button.
The "Screen" menu appears on the screen.
6 Press the M/m buttons to select "H Center" or "V
Center" and press the OK button.
The "H Center" adjustment menu or "V Center" adjustment
menu appears on the screen.
7 Press the M/m buttons to centre the test pattern on
the screen.
8 Click [END] on the screen to turn off the test pattern.
26
"Next."
Go to "Explorer" and open the CD-ROM icon.
(Screen) and