Descargar Imprimir esta página
LEGRAND Wattstopper LMSW-105-CCT Manual De Instrucciones
LEGRAND Wattstopper LMSW-105-CCT Manual De Instrucciones

LEGRAND Wattstopper LMSW-105-CCT Manual De Instrucciones

Controlador de temperatura de color correlacionada (cct) de bajo voltaje para el systema dlm

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

No: 24837 – 08/17 rev. 2
Catalog Number • Numéro de Catalogue • Número de Catálogo: LMSW-105-CCT
Country of Origin: Made in China • Pays d'origine: Fabriqué en Chine • País de origen: Hecho en China
This unit is pre-set for Plug n' Go™ operation,
adjustment is optional.
For full operational details, adjustment and more features
of the product, see the DLM System Installation Guide
provided with Wattstopper room controllers, and also
available at www.legrand.us/wattstopper.
Installation shall be in accordance with all applicable
regulations, local and NEC codes. Wire connections shall
be rated suitable for the wire size (lead and building wiring)
employed.
For Class 2 DLM devices and device wiring: To be
connected to a Class 2 power source only. Do not reclassify
and install as Class 1, or Power and Lighting Wiring.
Do not apply cleaning solvent directly onto unit. Apply
cleaning solvent onto a cloth, then wipe the unit to clean it..
MOUNTING THE SWITCH
WARNING: Do not install to cover a junction box having Class 1, 3 or
Power and Lighting Circuits.
The illustration shows an example of
free-topology wiring. The LMSW-105-CCT
communicates with all other Digital Lighting
Management devices connected to the low
voltage DLM Local Network.
Wattstopper
Digital Lighting Management Low Voltage Correlated Color
Temperature (CCT) Controller
Contrôleur de la température de couleur corrélée (TCC) de basse
tension de gestion numérique de l'éclairage
Controlador de temperatura de color correlacionada (CCT) de bajo
voltaje para el systema DLM
Quick Start Guide • Guide de démarrage rapide • Guía de inicio rápido
CONNECTIVITY AND WIRING
LMSW-105-CCT
LMTS-101-CCT
Preset Switch
Schedule Switch
Occupancy
Sensor
Daylighting Sensor
®
SPECIFICATIONS
Voltage .............................................................................. 24VDC
Current Consumption .............................................................5mA
Power Supply ................Watt Stopper/Legrand Room Controllers
Connection to the DLM Local Network .................... 2 RJ-45 ports
DLM Local Network characteristics when using LMRC-11x/2xx
room controllers:
Low voltage power provided over Cat 5e cable (LMRJ);
max current 800mA. Supports up to 64 load addresses,
48 communicating devices including up to 4 LMRC-10x
series and/or LMPL-101 controllers.
Free topology up to 1,000' max.
Environment ................................................. For Indoor Use Only
Operating Temperature .................32° to 131°F (0° to 55°C)
Storage Temperature ...................23° to 176°F (-5° to 80°C)
Relative Humidity .......................5 to 95% (non condensing)
Patent Pending
BUTTONS AND INDICATORS
Press and Hold to ramp
through CCT levels
The rocker LED is always ON if the LMSW-105-CCT is
bound to a load that is CCT enabled.
When the preset CCT Button level matches the CCT of the
DLM network, the LED will be bright.
LMPB-100
Power
Booster
LMRJ Cables
DLM Cable Connector
LMLM-101 Mounted on
Araya or Blanco Logic Module
NOTE: Each DLM local network must include a
DLM room controller, relay panel, or power booster
to supply low voltage power to the LMLM-101.
Blue Status LEDs
Preset CCT Buttons (4)
Configuration Button
(behind switch plate)
Red LED
120/277VAC
J-Box
LMFC-RJ
Red
Blue
Black

Publicidad

loading

Resumen de contenidos para LEGRAND Wattstopper LMSW-105-CCT

  • Página 1 For full operational details, adjustment and more features of the product, see the DLM System Installation Guide Power Supply ....Watt Stopper/Legrand Room Controllers provided with Wattstopper room controllers, and also Connection to the DLM Local Network ....2 RJ-45 ports available at www.legrand.us/wattstopper.
  • Página 2 PLUG N’ GO OPERATION (PNG) All loads are bound to all buttons and the dimmer paddle on the LMSW-105-CCT. Default CCT level To change the recorded CCT levels for any button, simply adjust the lights in the room to the desired levels and 100%K then press and hold the desired button for 5 seconds.
  • Página 3 Alimentation électrique ....Wattstopper contrôleur de pièce DLM fourni avec Wattstopper contrôleurs de pièce et aussi disponible au Connexion au réseau local DLM ........2 ports RJ-45 www.legrand.us/wattstopper. Caractéristiques du réseau local DLM pendant l’utilisation de LMRC-111/112: L’installation doit être effectuée conformément à tous les règlements La basse tension est générée par le câble Cat 5e (LMRJ);...
  • Página 4 RÉGLAGE DE L’APPAREIL - PUSH N’ LEARN (PNL) Procédure de sélection de la charge Un bouton de configuration permet d’accéder à notre technologie brevetée Push n’ LearnMC pour modifier les liens entre les dispositifs de commande et les charges. Étape1 Entrez en mode Push n’ Learn 1.
  • Página 5: Especificaciones

    Suministro de energía ..Controlador de habitación Wattstopper proporciona con los controladores de habitación Wattstopper; también Conexión a la red local DLM ........2 puertos RJ-45 está disponible en www.legrand.us/wattstopper. Características de red local DLM al usar controladores de habitación LMRC-11x/2xx : La instalación debe realizarse conforme con todas las...
  • Página 6: Solución De Problemas

    No. 24837 – 08/17 rev. 2 © Copyright 2017 Legrand All Rights Reserved. 800.879.8585 © Copyright 2017 Tous droits réservés Legrand. www.legrand.us/wattstopper © Copyright 2017 Legrand Todos los derechos reservados.