Stanley STHT77363 Manual Del Usuario página 2

GB
User Manual
Display Body
Color LCD Display
Video Output
Contrast
Brightness
Accessories
Camera Wand
Double
Single
Hook
Hook
STANLEY Inspection Camera
®
The inspection camera provides the user with
a minimally invasive means to inspect hard to
reach places. It includes an illuminated camera
wand and a video output jack for recording
video. The camera wand (camera end only)
is rated IP67 for use in wet locations. Multiple
attachment accessories are also included to aid
in inspection/small object recovery.
2
Wand Connector
Power LED
Power
Rotate/Mirror Image
fig #1
Video Cable
Retainer Rings
Mirror
Magnet
!WARNING To reduce the risk of injury
and/or property damage:
• ALWAYS follow all instructions and warnings
included in this user manual.
• ALWAYS ensure batteries are inserted in the
correct manner, with the correct polarity.
• DO NOT mix old and new batteries. Replace
all of them at the same time with new
batteries of the same brand and type.
• DO NOT short any battery terminals.
• DO NOT attempt to recharge alkaline
batteries.
• DO NOT mix battery chemistries.
• DO NOT dispose of batteries in fire.
IMPORTANT:
• DO NOT splash or immerse the display body
in water. Only the camera and wand are rated
to IP67, the display body is not and should
never be subjected to water or moisture.
• DO NOT use the camera if condensation
forms inside the lens.
• ALWAYS turn off the product when not in use.
• ALWAYS remove the batteries if storing the
unit for over a month
• DO NOT dispose of this product with
household waste.
• ALWAYS dispose of batteries per local code.
• PLEASE RECYCLE in line with local
provisions for the collection and disposal of
electrical and electronic waste.
INSTRUCTIONS
Batteries:
Open the door on back of unit and connect
4 AA batteries in the orientation depicted inside
battery compartment. Close battery door.