Stanley STHT77363 Manual Del Usuario página 3

Attach Camera Wand:
Gently push the camera wand connector onto
the connector of the display body. Turn the
threaded ferrule in a clockwise direction until
firmly seated, DO NOT over-tighten the camera
wand.
NOTE: To remove the wand turn the ferrule in
a counter-clockwise direction, this direction is
marked directly on the ferrule.
Attach Accessories:
All accessories attach to the camera end of the
wand in the same manner:
1. Hook the small end of the attachment into
the hole in the camera body.
2. Firmly slide retainer ring over attachment/
camera body.
Video Output:
Insert 3 mm jack on the video adapter cable
into the video output socket on the side of the
display body. The other end of the cable can
now be connected to any compatible RCA style
video input device.
Operation:
1. Press and hold the power button for
approximately 3 seconds to turn the camera
on; the power LED will illuminate and the
color LCD display will become viewable.
2. When in use, the camera wand should
be easily maneuverable into the desired
position. NOTE: Do not apply excessive
force to position the camera wand. If
maneuvering becomes difficult the wand
may be hitting an obstruction and should be
repositioned to avoid damage to the unit and/
or its surroundings.
3. During use, the rotate/mirror image button
(ref fig #1) can be used to better align the
camera view to the user.
4. During use, the brightness button
(ref fig #1) can be used to adjust the
camera's illumination LEDs to 8 different
levels for optimal viewing in less than ideal
lighting conditions.
5. During use, the contrast button (ref
fig #1) can be used to adjust the LCD
display's contrast to 8 different levels for
optimal viewing.
SPECIFICATIONS:
Screen Size
Effective Pixels
Contrast Levels
Brightness Levels
Battery Type
Battery Life
Video System
Output Signal Impedence
Output Signal Level
Water Resistance
Weight (w/Batteries)
Storage Temp. Range
2.31" TFT LCD
640x480
8
8
4 x AA (1.5V) Batteries
6 Hours Max
PAL/NTSC
75 ohm
0.9-1.3Vp-p
IP67 for camera wand
ONLY
Approximately 14.5 oz
(407g)
-20°F – 150°F
(-29°C – 66°C)
GB
3