Wolf Gourmet WGSC100S Guia De Usos Y Cuidados página 14

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USING COOKING MODES
Once the display becomes solid, flashing "CYCLE 2" and the
6.
heat settings of "WARM LOW MED HIGH" will display. Turn
the knob left or right to select WARM, LOW, MEDIUM, or HIGH
heat. Release the knob once a heat setting is selected; then
the setting will flash three times before it becomes solid.
Once the display becomes solid, the flashing "SETTING TIME"
7.
and "00:00" will display. Adjust the time setting by turning the
knob to the right to increase or to the left to decrease the time.
The time adjusts in 30-minute increments, with a minimum
time of 30 minutes and a maximum of 24 hours. Release the knob once the time is
set. The time and START/STOP button will start to flash.
NOTE: The total maximum combined cooking time for Cycle 1 and Cycle 2 is 24 hours.
Press the START/STOP button to start cooking. A long
8.
chime will sound and the START/STOP button will stay
illuminated. The screen will display "CYCLE 1," the selected
heat setting, and both the cycle cook time and the total
cook time.
When the Cycle 1 cook time is complete, a short chime
9.
will sound indicating the end of Cycle 1. The unit will then
switch to Cycle 2, and the heat and time settings will adjust
to the Cycle 2 settings.
When Cycle 2 is complete, a long chime will sound. "COOK
10.
TIME" and "00:00" will disappear. The unit will switch to the
"WARM" heat setting and the timer will begin to count up.
After 4 hours on WARM, the unit will shut off automatically.
Press the START/STOP button at any time to end cooking
11.
and turn off the unit. "OFF" will flash in the display and the
cooker will chime three times.
NOTE: During the cycle, the heat setting may be adjusted at any time by turning the
knob. The new selected setting will flash three times before it becomes solid and the
temperature adjusts. There is no need to press the START/STOP button. The time setting
may be adjusted at any point by pressing the TIMER button to reactivate time to a
flashing display, and the knob may be turned to adjust the cook time.
14

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido