Before Initial Operation; Temperature Setting; Initial Operation - Nevir NVR-4497 CTNFD Manual De Instrucciones

WARNING
COMPRESSOR ONLY. You must unplug the appliance to
disconnect it from the mains.

4.2 Before initial operation

1. Clean the appliance thoroughly. Be very careful especially inside the
appliance (look at chapter
2. If the accessories inside the appliance are not fitted in their correct
position, replace them according to the image in chapter 4.
3. Use the freezer compartment 24 hours after initial operation of the
appliance.
4. The appliance must be connected to the mains properly.
5. If the appliance was disconnected from the energy supply, wait 5 minutes
before you restart it.
6. Do not overfill the appliance

4.3 Temperature setting

4.3.1 Initial operation:

1. When you have connected the appliance to the mains for the first time, the
backlighting of the LED begins to flash. If no keys are operated and the
doors are closed, the backlighting goes off.
2. During initial operation, please set the temperature of the cooling
compartment to +4
3. The set temperatures are average temperatures. The temperatures may vary
depending on the amount and storage areas of the food. The ambient
temperature can also affect the actual cooling temperatures.
THE THERMOSTAT
CLEANING AND MAINTENANCE
0
C und and the temperature of the freezer to -18
CONTROLS THE
).
0
C.