1. Unclip and remove side panel from driver's side of dash with door
open and remove (2) 7mm screws. (Figure A)
2. Remove (2) 7mm screws from bottom edge of panel below
steering wheel, unclip panel and remove panel.
3. Unclip and remove side panel from passenger side of dash with
door open and remove (2) 7mm screws from behind panel.
(Figure B)
4. Open the glove box and disconnect the glove box dampener from
the glove box assembly. Squeeze sides together to open further.
(Figure C)
5. Remove (2) bolt covers from top edge of glove box frame.
(Figure C)
6. Remove (5) bolts from glove box frame and remove frame.
(Figure C)
7. Unsnap and remove climate control trim panel. (Figure D)
8. Remove (1) screw from lower left corner of radio trim panel and
unplug connectors to remove panel. (Figure D)
9. Remove (4) screws securing the radio. Unplug and remove
the radio.
Continue to kit assembly
Dash Disassembly
Saturn Sky 2006-2009
(Figure A)
(Figure C)
10
(Figure B)
(Figure D)