Metra 99-5833B Instrucciones De Instalación página 7

ISO DDIN radio provision
1. Secure the radio brackets to the radio
using the screws supplied with the
radio. (Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or AXXESS.
Test the radio for proper operation.
3. Slide the radio/bracket assembly into the
dash, then secure using the (2) #8 x 3/8"
Phillips screws provided.
4. Reassemble the dash in reverse order of
disassembly using the new radio trim
panel. Ensure to connect the panel with
the harness removed in step 5 from
Dash Disassembly.
Note: The door lock button will not be
active in 2019 models.
KIT ASSEMBLY
(Figure A)
7
REV. 3/12/20198 INST99-5833B