Metra 99-5829CH Instrucciones De Instalación página 5

Double DIN radio provisions
1. Attach the provided clips to the radio
trim panel. The factory clips may be
used if desired.
2. Attach the factory display to the radio
trim panel using the supplied (4)
#8 x 3/8" Phillips screws. (Figure A)
3. Mount the Double DIN radio to the
radio brackets using the screws
supplied with the radio. (Figure B)
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
5. Mount the new radio assembly into
the dash, snap-in the Radio Trim
Panel, and reassemble dash in
reverse order of disassembly.
Kit Assembly
(Figure A)
99-5829CH
5
(Figure B)