Dash Disassembly - Metra 99-5829CH Instrucciones De Instalación

IMPORTANT NOTE: The factory radio
must be powered off before starting
disassembly. Omitting this step will
disable the menu function.
1. Unclip and remove the (2) trim
panels from the left and right side of
the factory radio. (Figure A)
2. Unclip and remove the trim panel
around the shifter and slide toward
back of console. (Figure B)
3. Remove (6) 9/32" screws securing
the radio/climate control panel to
the dash. (Figure C)
Continued on next page

Dash Disassembly

(Figure A)
(Figure B)
99-5829CH
2
(Figure C)