FLORABEST FAH 18 B2 Manual De Instrucciones Original página 26

GB
use.the.cord.for.carrying,.pulling.
or.unplugging.the.power.tool..
keep.cord.away.from.heat,.oil,.
sharp.edges.or.moving.parts..
Damaged or entangled cords increase
the risk of electric shock.
•. When.operating.a.power.tool.
outdoors,.use.an.extension.cord.
suitable.for.outdoor.use. Use of
a cord suitable for outdoor use reduces
the risk of electric shock.
•. If.operating.a.power.tool.in.a.
damp.location.is.unavoidable,.
use.a.residual.current.device.
(RCD).protected.supply. Use of an
RCD reduces the risk of electric shock.
3). PERSoNAL.SAFETy.
•. Stay.alert,.watch.what.you.are.
doing.and.use.common.sense.
when.operating.a.power.tool..
Do.not.use.a.power.tool.while.
you.are.tired.or.under.the.influ-
ence.of.drugs,.alcohol.or.medica-
tion. A moment of inattention white op-
erating power tools may result in serious
personal injury.
•. Use.personal.protective.equip-
ment..Always.wear.eye.protec-
tion. Protective equipment such as dust
mask, non-skid safety shoes, hard hat,
or hearing protection used for appropri-
ate conditions will reduce personal inju-
ries.
•. Prevent.unintentional.starting..
Ensure.the.switch.is.in.the.off-
position.before.connecting.to.
power.source.and/or.battery.
pack,.picking.up.or.carrying.the.
tool. Carrying power tools with your
finger on the switch or energising power
tools that have the switch on invites ac-
cidents.
26
•. Remove.any.adjusting.key.or.
wrench.before.turning.the.power.
tool.on. A wrench or a key left at-
tached to a rotating part of the power
tool may result in personal injury.
• Do not overreach. Keep proper foot-
ing and balance at all times. This
enables better control of the power tool
in unexpected situations.
• Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
• If devices are provided for the con-
nection of dust extraction and col-
lection facilities, ensure these are
connected and properly used. Use of
dust collection can reduce dust-related
hazards.
4) PoWER tool uSE AND cARE
• Do not force the power tool. use the
correct power tool for your applica-
tion. The correct power tool will do the
job better and safer at the rate for which
it was designed.
• Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be control-
led with the switch is dangerous and
must be repaired.
• Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjust -ments, changing accesso-
ries, or storing power tools. Such pre-
ventive safety measures reduce the risk
of starting the power tool accidentaIly.
• Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate