Care And Maintenance; Specifications - Beurer SL 70 Manual De Instrucciones

6. Care and Maintenance

• Shut the device off before cleaning.
• Clean the device with a soft damp cloth then wipe dry with a soft, lint-
free cloth after each use.
• Only clean the device as instructed. Always keep liquids from entering
the device or accessories.
• Do not use the device until it is completely dry.
• An elongated object or brush works well to remove any ear wax stuck
in the earplug cover.
• Allow the device to dry fully after cleaning. Store the device in a safe,
dry and clean place.

7. Specifications

Dimensions:
Weight:
Connection:
Power supply:
Battery:
Battery Usage:
Memory:
Earplug material:
Data transfer:
Operating conditions:
Storage and transportation conditions:
The Bluetooth
®
by Bluetooth SIG. Inc. and any use of such marks by Beurer GmbH
is under license. Other trademarks and trade names are those of their
respective owners.
1.9 in x 0.6 in x 2.4 in (49 x 15 x 62 mm)
15 g (without earplugs)
Micro USB
Input: 100 – 240 VAC; 50/60 Hz; 0.3 A
Output: 5 V
80 mAh lithium polymer
About four days on a full charge
One night of heavy snoring
Silicone
Bluetooth
Temperature: 32° – 140° F (0° – 60° C)
Relative humidity: 30% – 75%
Ambient pressure: 860 – 1060 hPA
Temperature: -4° – 140° F (-20° – 60° C)
Relative humidity: < 75%
Ambient pressure: 860 – 1060 hPA
word mark and logos are registered trademarks owned
1000 mA
low energy technology
®
8