Listening Modes - Boston Acoustics TVee One Speaker Base Manual De Usuario

E
N
G
L
About the TVee Control Button LEDs
I
The eight LEDs illuminating the top panel control buttons flash or light in various patterns to indicate different functions.
S
H

Listening Modes

TVee One includes five Listening Modes for different kinds of audio programs, room acoustics, or personal preferences. It also
has a special "Night Mode, " which enhances low-volume listening, which is described in the following section.
Select a Listening Mode using either Listening Mode key (front panel or remote). Each keypress advances in sequence
through the five modes – Dialog, Music, Music Wide, Movie, and Movie Wide. TVee One's front panel key LEDs momen-
tarily display a pattern representing each newly selected mode. The following information describes the various listening
modes, and shows an illustration of the LED pattern displayed when that mode is selected.
Note: The LED displays used to indicate the various Listening Modes are simple horizontal display patterns – there is no cor-
respondence between the lit LEDs and their underlying key functions.
Dialog mode highlights center-recorded
sounds such as movie dialog, television an-
nouncers, or musical soloists; it's valuable for
everyday television viewing. The Remote Learning and Listening Mode LEDs light to indicate the Dialog mode is selected.
Music mode produces conventional stereo
sound. The Bluetooth and Mute LEDs light to
indicate the Music mode is selected.
Music Wide mode widens the "soundstage"
somewhat for a more enveloping, involving
sound. The four buttons indicated light when
it is selected.
10
Power Momentarily bright when TVee One is turning on/waking from sleep; steadily dim while on/awake
(operating mode); steadily dark when TVee One is "asleep" in standby mode; flashes when toggling between
manual- and auto-on/standby modes.
Television Input Momentarily bright when Television Input is selected, whether manually or automatically by
active signal at any wired input.
Bluetooth Input Flashes rapidly bright while Bluetooth is "pairing" a wireless device; steadily bright when selected.
The Bluetooth LED will flash bright, slowly, while attempting to re-pair a device that has passed out of range or
otherwise lost wireless contact, and blink rapidly to indicate a Bluetooth error (unable to pair). This will cease after 60
seconds or if any TVee One key is pressed.
Learning Flashes when learning functions from your remote (see "Use Any Remote to Control your TVee One").
Listening Mode Flashes once when pressed at the front panel, and selects the next Listening Mode (see
"Listening Modes, " below).
Mute Flashes bright continuously as long as Mute function is invoked.