Boston Acoustics TVee One Speaker Base Manual De Usuario página 9

The Controls on Top of TVee One
1
1) Power on/standby
2) Television Input Listen to sound from the television; auto-selects the active signal.
Should multiple inputs have signal present, priority is given to optical-digital, coaxial-digital,
and 1/8" analog stereo mini plug, in that order.
3) Bluetooth Input Listen to wireless audio streamed from your Bluetooth enabled mobile device.
(see Using Bluetooth on page 11).
4) Remote Learning Press to engage Learning Mode. (see "Use Any Remote to Control your TVee One, " below).
5) Listening Mode Toggles through the 5 Listening modes (see "Listening Modes, " below).
6) Mute sound Mutes the audio; press again to unmute. (Pressing either Volume key also unmutes).
7) Volume down Press-and-hold to continuously decrease the volume.
8) Volume up Press-and-hold to continuously increase the volume.
About TVee's Automatic Power Modes
TVee One will automatically "wake-up" whenever any of its wired inputs receives an audio signal. Simply turning on your
television will also turn on TVee One. (For Bluetooth playback you will need to turn on TVee One manually using the remote
control or top panel controls.) Because of TVee One's power saving design, the system takes five to seven seconds to turn on
from standby. Pressing either the front-panel Television Input or Bluetooth keys will also power up the TVee One. Press the
Power key again to return TVee One to its low-power "standby" mode. TVee One will automatically return to standby after five
minutes of not receiving any audio, for example, after you turn off your television set.
If you wish to change this auto-on behavior you may switch between the standard automatic wake-up/standby mode,
and a manual power on/standby mode. To change from one to the other, press-and-hold the front panel Power key for 3
seconds. The power key LED will flash bright for 3 seconds, then illuminate steadily for 3 seconds, and then go completely
dark, indicating you have changed to manual power mode. Each time you repeat the Power-key press-and-hold it will change
to the other mode. In manual power mode TVee One is switched to on or standby with a momentary press of the Power key.
2 3 4 5 6 7 8
9