Night Mode; Using Bluetooth - Boston Acoustics TVee One Speaker Base Manual De Usuario

Movie mode adds ambient and rear effects
to the widening process for a surround-like
experience. A more widely separated array of
buttons lights to indicate the mode's selection.
Movie Wide mode deploys TVee One's
maximum processing for the "biggest" possible
sound on action films or other large-scale con-
tent. Six widely spaced LED's light to indicate
this mode.
Have fun experimenting and choosing the mode that's best in your room. Try "Music" or "Music Wide" for small reflective
rooms, and "Movie" or "Movie Wide" for big open rooms.

Night Mode

Night Mode improves low-volume listening by subtly lifting softer sounds, and lowering very loud ones. While you may use
Night Mode whenever you like, for maximum dynamic realism from television programming, movies or music, leave night
mode turned off.
To engage Night Mode, press the Day/Night
Mode button for three seconds. When Night Mode is engaged, the LED pattern for the current Listening Mode will
flash dim. To exit Night Mode, use the same buttons in the same way. When TVee exits Night Mode, the LED pattern for the
current listening mode will flash bright.
Volume Change Indication
When you adjust TVee One's volume from the remote control, the 8 front-panel LEDs momentarily function as a horizontal
"bar-graph" of the volume setting reached, illuminating from 1 to all 8 buttons, the latter indicating maximum volume.

Using Bluetooth

TVee One can stream music wirelessly, via Bluetooth, from any compatible, Bluetooth-equipped device such as a mobile
phone, tablet, or laptop computer.
Pairing Your Bluetooth Device
Before you can stream Bluetooth audio to TVee One, you must pair your device to TVee One.
To pair the device to the TVee One for the first time:
1 Press-and-hold the Bluetooth key (front panel or remote) for at least 3 seconds; the Bluetooth LED will begin
to flash rapidly.
2 Go to Bluetooth settings on your device. Make sure the device's Bluetooth feature is set to "on".
3 From the Bluetooth list on your device, select "TVee One".
4 Playback audio on the Bluetooth source; you should now hear audio from the TVee One. TVee One's Bluetooth
key LED will remain on as long as TVee One's Bluetooth input is selected and active.
TVee One can pair multiple Bluetooth devices; however, only one can play at a time. One Bluetooth Source will need to be
disconnected before another paired device can play.
button on the remote control, or press and hold the front panel Listening
11