Maintenance And Repair; Pages; Maintenance Checklist - Craftsman 316.350840 Manual Del Usuario

MAINTENANCE AND REPAIR INSTRUCTIONS
MAINTENANCE SCHEDULE
Perform these required maintenance procedures at the fre-
quency stated in the table. These procedures should also
be a part of any seasonal tune-up.
NOTE: Maintenance, replacement, or repair of the
emission control devices and system may only be
performed by a Sears or other qualified service
dealer.
A good preventive maintenance program of regular inspection and care will increase life and improve performance of your
chain saw. This maintenance checklist is a guide for such a program.
Cleaning, adjustment, and part replacement may be required, under certain conditions, at more frequent intervals than
those indicated.

MAINTENANCE CHECKLIST

ITEM
CHECK FOR LOOSE SCREWS/
NUTS/BOLTS
CLEAN OR REPLACE THE AIR FILTER
REPLACE SPARK PLUG
REPLACE OIL / FUEL FILTER
CLEAN, INSPECT SPARK PLUG
ARRESTOR SCREEN / MUFFLER
CHECK GUIDE BAR AND CHAIN OIL,
FUEL HOSES
CLEAN UNIT AND INSPECT DECALS
CHECK CHAIN BRAKE® COMPONENTS
CLEAN GUIDE BAR GROOVE
CHECK FOR DAMAGED / WORN PARTS
CHECK CHAIN TENSION
CHECK CHAIN SHARPNESS
LUBRICATE SPROCKET TIP
CHECK FUEL MIXTURE
CUSTOMER RESPONSIBILITY
BEFORE EACH USE
NOTE: Maintenance, replacement, or repair of the emis-
sion control devices and system may be per-
formed by a Sears or other qualified service dealer.
WARNING:
maintenance or repairs with unit running.
Always service and repair a cool unit.
Disconnect the spark plug wire to ensure that
the unit cannot start.
AFTER
EACH USE
15
To prevent serious
injury, never perform
HOURS OF OPERA-
TION
10 20