- Result of an addition and the individual values of the addition
are automatically stored in the memory.
Subtraction (Minus)
The subtraction of measurements is carried out in the same way as
the addition. The only difference is that the add / subtract button
has to be pressed again while the plus symbol is flashing on the
display to get minus symbol on the display. Rest are same.
Historical memory
All measured and calculated values will be automatically stored in
the memory. The values are saved with their unit (length, area or
volume). Calculated values are stored together with the respective
individual values. There are a total of 100 memory locations avail-
able. As soon as all 100 memory locations are occupied, the old-
est memory record will be over-written by newest record.
Calling up a stored memory
Briefly press the memory button
memory. Memory icon
the respective memory location number will be shown on the
"memory location number row"
uct has entered the historical memory mode.
Press the memory button
to display the latest stored
9
will be displayed on the display and
27
to indicate that the prod-
19 b
again to go to next memory.
9
7
GB/MT
109